Arkansas HVACR NewsMagazine January 2020

S tate, National, Chapter News Tech News

#8 – Multiply that # by the BTU heat content of 1 Cu/Ft of gas provided by the utility. If it is 1,000 (which is common for NG) the total BTU per hr would be 81,820 The complete formula is Cubic Feet per Hour (CFH) = (3600 x Dial Size) / Time (seconds) Then to get the ACTUAL device output in BTU’s you would multiply for the AFUE efficiency. In this case if it was an 80% furnace the input is 81,820 btu/hr and the output would be 65,456

CLOCKING A GAS METER (IT’S NOT THAT HARD)

Bryan Orr , HVACR School.com

Pretty cool huh?

–Bryan

I’ve heard a lot made of clocking gas meters over the years and honestly, in Florida there isn’t too much call for heat and even fewer furnaces. I was pleasantly surprised when I found out how easy it actually is. Here is how you do it, step by step. #1 – Make sure all gas appliances are off other that the one you are clocking. Even shut off pilot lights or it can mess with your reading. #2 – Make sure the appliance you are checking is running at high fire (max output). #3 – Get a stopwatch (your phone has one). #4 – Watch the smallest unit dial on the gas meter, it will often be 1/2 cubic ft. #5 – Time how long that dial takes to make one full revolution with the stopwatch. #6 – Multiply the dial size by 3600 (3600 is the # of seconds in an hr) so if it’s a 1/2 cu/ft dial it would be 1,800. #7 – divide that # by the # of seconds it took. So lets say it took 22 seconds that would be 1,800 / 22 = 81.82

Bryan Orr

( Founder / Podcaster / Dad of 10 ) Bryan Orr is a lifelong learner, proud technician and advocate for the HVAC/R Trade

Clocking a Gas Meter Pretty cool huh?